Table of Contents
Advertisement
Parameter
PCI Bus Driver Version
GENZ_# OCP Lanes
GENZ_#/OCP3_1/U2_1 ROM
OCP3 Lanes
(Note2)
Onboard LAN I/O ROM
Onboard LAN Controller
Onboard LAN I/O ROM
PCI Devices Common Settings
Above 4G Decoding
SR-IOV Support
(Note1) This section is dependent on the available PCIe Slot.
(Note2) This section is dependent on the available OCP device.
(Note3) This section is dependent on the available LAN controller.
BIOS Setup
Description
Displays the PCI Bus Driver version information.
Change the PCIe lanes.
Options available:
Auto / x16 / x8 x8 / x8 x4 x4 / x4 x4 x8 / x4 x4 x4 x4
(Note1)
(OCP2 Lanes only features Auto / x8 / x4 x4.)
Disabled. Default setting is Auto.
When enabled, this setting will initialize the device expansion
ROM for the related PCI-E slot.
(Note1)
Options available: Enabled/Disabled. Default setting is Enabled.
Change the OCP3 lanes.
Options available: Auto/Maximum/Gen1/Gen2/Gen3/Gen4.
Disabled. Default setting is Auto.
Enable/Disable the onboard OCP3 devices and initializes device
expansion ROM.
(Note3)
Options available: Enabled/Disabled. Default setting is Enabled.
Enable/Disable the onboard LAN devices.
(Note3)
Options available: Enabled/Disabled. Default setting is Enabled.
Enable/Disable the onboard LAN devices and initializes device
expansion ROM.
(Note3)
Options available: Enabled/Disabled. Default setting is Enabled.
Enable/Disable memory mapped I/O to 4GB or greater address
space (Above 4G Decoding).
Options available: Enabled/Disabled. Default setting is Enabled.
If the system has SR-IOV capable PCIe devices, this item Enable/
Disable Single Root IO Virtualization Support.
Options available: Enabled/Disabled. Default setting is Enabled.
- 70 -
Advertisement
Table of Contents
