ViewSonic VS12415 User Manual page 34

DDC/CI
• Turns on or off the DDC/CI (Display Data Channel/Command Interface) function of the LCD monitor.
When this function is turned on and the LCD monitor is connected to a PC, the LCD monitor
communicates with the PC and automatically and optimizes image display.
• Press ENTER, and then
Reset
• If activated, all OSD settings (except the Language setting) will be restored to the factory settings.
• Press ENTER button to activate the reset.
Diagnostic
• Press ENTER button to display the diagnostic information of the LCD monitor:
• Thermal: Displays current temperature inside the LCD monitor.
• Backlight: Displays current backlight brightness of the LCD monitor.
• Ambient: Displays current ambient brightness around the LCD monitor.
• 5V Detect: Displays current 5V voltage detection result.
• 12V Detect: Displays current 12V voltage detection result.
• Operating Time: Displays the time elapsed since the LCD monitor was last turned on. D=Day,
H=Hour.
• Open Lamp Detection: Indicates the number of broken LCD backlight tubes. The LCD monitor
will not work if there are 3 broken LCD backlight tubes. Contact your nearest customer service
center for further inspection or repair.
ViewSonic CD5230
or button to turn this function on or off.
Setting
Thermal
Backlight
Ambient
5V Detect
12V Detect
Operating Time
Open Lamp Detection
:Move
Enter
+ 38 C
1Lux
368Lux
4.8V
11.8V
2D 23H
0
:Enter Exit :Exit
32