Positron IP410G User Manual
  1. Manuals
  2. Brands
  3. Positron Manuals
  4. IP Phone
  5. IP410G
  6. User manual

Positron IP410G User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IP410G and IP410C - User Manual
User Manual for
IP410G and IP410C Phones

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IP410G and is the answer not in the manual?

Questions and answers

Related Manuals for Positron IP410G

Summary of Contents for Positron IP410G

  • Page 1 IP410G and IP410C - User Manual User Manual for IP410G and IP410C Phones...
  • Page 2 Copyright © 2015 Positron Telecommunication Systems. All rights reserved. Positron Telecommunication Systems owns all the right to revise and change this document at any time. And all the illustrations and instructions in this paper are subject to the copyright protection of legal law. No parts of this document may be used or reproduced, transmitted by the third parties for any purposes without the express written permission of Positron Telecommunication Systems.

  • Page 3: Table Of Contents

    IP410G and IP410C - User Manual Table of Content Getting Started ..............................6 Packing List ..............................6 Phone Installation ............................8 1. Attach the Foot stand ............................8 2. Connect the Handset and optional Headset ..................... 8 3. Connect the Network and Power ........................9 Initialization ..............................
  • Page 4 IP410G and IP410C - User Manual LDAP Phonebook ............................54 Broadsoft Phonebook ..........................56 Call log ................................ 57 Other features settings ............................ 57 Dial Plan ..............................57 Emergency Call............................59 LED Status Setting ............................59 Action URL ..............................60 Softkey Layout ............................. 60 Programmable Key ............................
  • Page 5 IP410G and IP410C - User Manual XML Group ..............................97 LDAP ................................98 XML Browser ............................... 99 Broadsoft Group ............................100 Conference ..............................101 Forward ..............................101 Transfer ..............................102 Hold................................102 Group Listening ............................103 DND ................................103 Redial ................................ 104 SMS ................................

  • Page 6: Getting Started

    IP410G and IP410C - User Manual Getting Started Packing List The package contains the following parts: 1. The phone device 2. The foot stand 3. Handset...
  • Page 7 IP410G and IP410C - User Manual 4. Headset cord 5. Power adapter 6. Ethernet cable 7. Quick installation reference...

  • Page 8: Phone Installation

    IP410G and IP410C - User Manual Phone Installation 1. Attach the Foot stand 2. Connect the Handset and optional Headset...

  • Page 9: Connect The Network And Power

    IP410G and IP410C - User Manual 3. Connect the Network and Power Initialization After your phone has been powered up, the system boots up and performs the following steps: Automatic Phone Initialization: The phone finishes the initialization process by loading the saved...

  • Page 10: Status

    IP410G and IP410C - User Manual And then show “Initializing “during the initialization. By default the phone attempts to contact a DHCP server in your network in order to obtain its valid network settings, e.g. IP address, subnet mask, default gateway, DNS server.
  • Page 11 IP410G and IP410C - User Manual 2. Press Menu  Status Network 3. Press Menu  Status  Account To view the phone status via Web interface: Login webpage (For How to login, please refer to Web Login) View the information of Version, Account and Network.

  • Page 12: Registration

    IP410G and IP410C - User Manual Registration To register via phone interface: Press Menu  Setting  Advanced setting (default password: admin)  Accounts Select the desired account Select Enable for Account active Filled the SIP Server Filled the Failover SIP server if need (Optional)
  • Page 13 IP410G and IP410C - User Manual To register via web interface: 1. Login webpage and Click Account  Basic 2. Select the desired Account 3. Select Yes for Account Active 4. Filled the Primary SIP SERVER and other account information 5.

  • Page 14: Idle Screen

    IP410G and IP410C - User Manual Idle Screen Name Description 1. Date&Time It shows the phone’s time & date. It shows the phone features status. For more information refer to Icon 2. Notice Preview. This area shows the four line key labels. Line keys are also can be used 3.

  • Page 15: Getting Familiar With The Phone

    IP410G and IP410C - User Manual Getting Familiar with the Phone Hardware Components Preview Item Description To Presentation all information about the date& time, accounts, LCD screen soft keys, messages, calls and other some information. Power Indicator LED To indicate the power status...
  • Page 16 IP410G and IP410C - User Manual 1. To mute the voice during the call (green light). Mute key 2. To un-mute the call. Conference To place a conference call To be configured as different function as: 1. Line 2. Speed Dial 3.

  • Page 17: Icon Preview

    IP410G and IP410C - User Manual To show the accounts status and some other relevant Information information. To transfer a call to a third party. Transfer To enable or disable Forward feature during the idle page. Alphanumeric keypad To enter the phone numbers, letters and so on.
  • Page 18 IP410G and IP410C - User Manual Mute Do Not Disturb Volume is 0 Hold Dialed calls Received calls Missed calls Forward calls Conference Keypad locked Keypad unlocked Pick up Call Park Intercom/Paging DTMF...
  • Page 19 IP410G and IP410C - User Manual Prefix XML Group Local Group XML Browser LDAP Broadsoft Group Conference Forward Transfer Hold Line on Hold Redial Call Return Record Recording Group Listening Shared Line Other Functions...

  • Page 20: Led Instruction

    IP410G and IP410C - User Manual LED Instruction This part mainly instructs the LED status. The Power LED Status describe on the premise that the LED setting all set as Yes. For LED status setting, please refer to: LED Status Setting...

  • Page 21: Other Key Led

    IP410G and IP410C - User Manual Blinked red The line is ringing Steady orange During a Call Blinked orange Public Hold Unregistered Other Key Led Description When use in headset mode, the LED is Headset Key steady green or the LED is off.
  • Page 22 IP410G and IP410C - User Manual 3. Fast access to the new missed or Forward calls, New Voicemail or Text Message. 4. Get all other parties information during a conference.

  • Page 23: User Interface

    IP410G and IP410C - User Manual User Interface There are two ways to customize specific configurations on your IP phone:  The user interface on the IP phone  The user interface in a web browser on your PC The hardware components keypad and LCD screen constitute the phone user interface, which allows the user to execute all call operation tasks and basic configuration changes directly on the phone.

  • Page 24: Memory Key Function Overview

    IP410G and IP410C - User Manual Auto provision Directory Add, view and delete History View and delete Message Voice Mail set and View. Display Mode Wallpaper Display Screensaver Memory Key Function Overview Line Speed Dial BLF List Voice Mail Direct Pick Up...

  • Page 25: Basic Setting Configuration

    IP410G and IP410C - User Manual Basic Setting Configuration This part will mainly introduce the basic configuration as the Time, Language, and Volume… Web Login 1. Get the IP address: Press Menu  Status  Information. 2. Input the IP Address in the web browser.

  • Page 26: Administrator Password

    IP410G and IP410C - User Manual Administrator Password The password is mainly used for login the web interface or set the advanced settings through phone interface. And the default password of the administrator is: admin To change to password via Phone Interface 1.

  • Page 27: Basic Network Setting

    IP410G and IP410C - User Manual Basic Network Setting Positron IP Phone supports three mode of Network: DHCP, Static, and PPPoE. The default mode is DHCP; it will obtain IP address and other information automatically. If your phone cannot contact a DHCP server for any reason, you need to configure a static IP address manually.
  • Page 28 IP410G and IP410C - User Manual Press the Save soft key to accept the change or the Cancel soft key to cancel. If you are using an xDSL modem, you can connect your phone to the Internet via PPPoE mode. You can set a WAN port to be a PPPoE port. The PPPoE port will perform a PPP negotiation to obtain the IP address.

  • Page 29: Pc Port

    IP410G and IP410C - User Manual 4. Click the and restart the phone. Note: Wrong network parameters may result in inaccessibility of your phone and may also have an impact on your network performance. For more information about these parameters, contact your system administrator.

  • Page 30: Display Mode

    IP410G and IP410C - User Manual To configure Bridge via web interface: 1. Click Network  Basic 2. Select 3. Click and restart the phone To configure Router via web interface: 1. Click Network  Basic 2. Select As Router 3.

  • Page 31: Language

    IP410G and IP410C - User Manual To Configure Display mode via web interface: 1. Login web interface, and click Setting  Preference 2. Select Icon Mode or Text Mode for the Display mode 3. Click to save the configuration. Language The default Phone interface language is English.

  • Page 32: Time And Date

    IP410G and IP410C - User Manual Press or Save soft key to save the configuration. To change the language via Web Interface Setting  Preference  Web Language Select the necessary one. Press to save the configuration. Note: All languages may not be available for selection. The available languages depend on the language packs currently loaded to the IP phone.
  • Page 33 IP410G and IP410C - User Manual Note: Press , all zone will show on the display, select the one you want and press save or confirm key to save the configuration. To configure time and date manually via phone interface 1.
  • Page 34 IP410G and IP410C - User Manual 4. Press or Save soft key to save the configuration. To configure the DHCP time via phone interface 1. To press Menu  Setting  Basic setting  DHCP time 2. Press or press to change between Disable and Enable.
  • Page 35 IP410G and IP410C - User Manual To change the Time Zone and Date Display Format via web interface Setting  Preference  Time Zone Select the necessary one. Press to save the configuration. Note: If the IP Phone cannot obtain the time and date from the Simple Network Time Protocol (SNTP) server, please...

  • Page 36: Ring Tone

    IP410G and IP410C - User Manual Ring Tone You can adjust the type and volume of the ring tone. To adjust the Ring Tone Type via Phone interface: 1. Press Menu  Setting  Basic Settings  Ring Tone 2. Press to select the aimed one.
  • Page 37 IP410G and IP410C - User Manual To configure Distinctive Ring Tone via Phone Interface 1. Press Directory 2. Select the target contact 3. Press Detail soft key to edit the contact. 4. Press to select the wanted Ring Tone for the contact...

  • Page 38: Font Size

    IP410G and IP410C - User Manual To configure Distinctive Ring Tone via Web Interface 1. Directory  Directory  Contact 2. Choose the Ring Tone you want to use. 3. Click to save the configuration. Font Size To configure the Time & Date Format via phone interface 1.

  • Page 39: Volume

    IP410G and IP410C - User Manual To configure Font Size via Web Interface 1. Setting  Preference 2. Find and then choose the desired: 18/ 20/ 24/ 26. 3. Click to save the configuration. Volume You can adjust the volume for the phone by the volume keys:...
  • Page 40 IP410G and IP410C - User Manual To adjust the Ring tone volume via phone interface: 1. Option 1: To press on the idle page 2. Option 2: To press during the call is ringing. To adjust the handset volume via phone interface: To press during a call in handset mode.

  • Page 41: Wallpaper

    IP410G and IP410C - User Manual To adjust the speaker Volume via phone interface: To press during a call in speaker mode. Wallpaper To change the preferred one picture for you by the following steps: To change the wallpaper via phone interface: 1.

  • Page 42: Screen Saver

    IP410G and IP410C - User Manual To change the wallpaper via web interface: 1. Click Setting  Preference 2. Select the desired wallpaper picture 3. Click to save the setting. Screen Saver There are three types of screen saver: Time & Logo, Photo Switch and Photo.
  • Page 43 IP410G and IP410C - User Manual To disable screen saver via Phone interface 1. To press Menu  Display  Screensaver 2. Press or press Switch soft key to Choose the Time-out as off. 3. Press or Save soft key to save the selected configuration.
  • Page 44 IP410G and IP410C - User Manual To delete upload screen saver phone via Web interface: 1. Setting  Preference 2. Select the photo that to delete. 3. Click Delete to delete the photo. To wake up screen saver via Web interface: 1.

  • Page 45: Led Status Setting

    IP410G and IP410C - User Manual Note: 1. The upload Photo size should be less than 2M bytes, name length should be less than 48, and the File name should be letters, numbers or underline '_' and photo number should be less than 9.

  • Page 46: Contact Management

    IP410G and IP410C - User Manual Contact Management This section provides the operating instructions for managing contacts. The topics Include:  Local Directory  Blacklist  Remote Phonebook  Call History  LDAP  BroadSoft Phonebook  Call Log Directory In the directory, you can add or delete your friends, business partner or anyone others’...
  • Page 47 IP410G and IP410C - User Manual To add contacts from history via phone interface: 1. Press History soft key or press Menu  History  Local history 2. Press to select the targeted one. (Press switched among the All calls, Dialed calls, Received calls, Missed Calls and Forward Calls).
  • Page 48 IP410G and IP410C - User Manual To add contacts via web interface: 1. Click Directory 2. Enter the name, number and some other information. 3. Press and then press button. B: To add contacts into blacklist To add blacklist manually via phone interface: 1.
  • Page 49 IP410G and IP410C - User Manual 4. Edit the necessary information as Name, Phone number… 5. Press save soft key or to add successfully. Upload Contacts photo via web interface: Click Directory and select the desired contact. Click Choose file to select the photo for the contact Click to upload the photo.
  • Page 50 IP410G and IP410C - User Manual When you place a call from the contact, the phone idle screen will show the contact photo. Note: The format of the photo supported is jpg or bmp, and the size should be less than 128 *128 To import or export the contact list You can manage your phone’s local directory via phone or web user interface.

  • Page 51: Remote Phonebook

    IP410G and IP410C - User Manual Remote Phonebook To set Remote Phone Book via web interface: 1. Login the webpage and click Directory  Remote Phone Book 2. Fill the path of the remote file in the Phone Book URL field.
  • Page 52 IP410G and IP410C - User Manual To enable the history record feature via phone interface: 1. Press Menu  Feature  History Setting 2. Press or Switch soft key to enable History record. 3. Press Save soft key to save the configuration.
  • Page 53 IP410G and IP410C - User Manual To delete an entry from the call history list via phone interface: 1. Press the History soft key. 2. Press Right or Left Key to switch among All Calls, Missed Calls, Received Calls, Dialed Calls and Forwarded Calls.

  • Page 54: Ldap Phonebook

    IP410G and IP410C - User Manual To Dial a call from Call History via phone interface: 1. Press History soft key or press Menu  History  Local history 2. Press to select the targeted one. 3. Press the Send soft key, or , or , or the corresponding line key.
  • Page 55 IP410G and IP410C - User Manual To Configure LDAP Key To configure LDAP Key via web interface: 1. Click Function Key  Memory Key  choose Memory Key 1 (for example) 2. Select LDAP in the Type field. 3. Click to save the configuration.

  • Page 56: Broadsoft Phonebook

    IP410G and IP410C - User Manual Broadsoft Phonebook You can access the BroadSoft directory through your phone. You can add local contacts from the BroadSoft directory. You can also dial a contact from the BroadSoft directory. You can configure your new phone to access up to 6 BroadSoft directories.

  • Page 57: Call Log

    IP410G and IP410C - User Manual Call log You can access the call log of the BroadSoft user through the IP phone. The call log contains call information such as remote party identification, time and date. You can check the call log and dial a call from the call log list.
  • Page 58 IP410G and IP410C - User Manual Grammar Description any digit from 0-9 at least 2 digit number exclude hear dial tone [3-5] any digit of 3, 4, or 5 [147] any digit 1, 4, or 7 <2=011> replace digit 2 with 011 when dialing To configure dial plan via web interface: Click Account ...

  • Page 59: Emergency Call

    IP410G and IP410C - User Manual Emergency Call Public telephone networks in countries around the world have a single emergency telephone number (emergency services number), that allows a caller to contact local emergency services for assistance when required. The emergency telephone number may differ from country to country. It is typically a three-digit number so that it can be easily remembered and dialed quickly.

  • Page 60: Action Url

    IP410G and IP410C - User Manual 3. Click for the setting. Action URL To configure action url via web interface: 1. Click Setting  Action URL 2. Filled the needed value in the necessary blank. 3. Click to save the setting.

  • Page 61: Programmable Key

    IP410G and IP410C - User Manual 6. Click to change to position or each feature. 7. Click to save the configuration. Note: When there more than 5 items in the Enable field, the last softkey will display More, and last two item will show in the next page softkey, you can check by press more.

  • Page 62: Ext Key

    IP410G and IP410C - User Manual Ext Key It only works when there is expansion module connected with the phone. For Ext Key configuration, please refer to: IP40 User manual. Basic Call Features Place a Call There are three ways to dialing a call: Handset, Headset and Hands-free speakerphone.
  • Page 63 IP410G and IP410C - User Manual 1. Press the ( light is Green), 2. Enter the desired number. 3. Press , or press the Send softkey, then the call is sending. Using headset to place and answer calls for all time 1.

  • Page 64: End A Call

    IP410G and IP410C - User Manual 3. Press the Send soft key, or , or , or the corresponding line key, then the call is sending. Note: 1. The key is set to be a send key. You can set the * key as send key or set some other to be as send keys.

  • Page 65: Incoming Call Show Mode

    IP410G and IP410C - User Manual To receive a call by handset Pick up the handset the conversation is built. To receive a call by headset Press and now the conversation is built. To receive a call by hands-free speaker 1.

  • Page 66: Auto Answer

    IP410G and IP410C - User Manual 3. Click to save the setting. Auto Answer Enable auto answer feature, you will answer all incoming call automatically. To enable Auto Answer via Web interface 1. To Click Account  Advanced 2. To choose Yes for the Auto Answer.

  • Page 67: Call Transfer

    IP410G and IP410C - User Manual To make a call on hold during three modes: To hold a call under handset mode: 1. Press Hold soft key or to hold the current call. 2. Press Resume soft key or to resume the call on hold.
  • Page 68 IP410G and IP410C - User Manual Attended Transfer When you use this feature, you can 1. Press or transfer soft key during the conversation, the call is on hold now. 2. Enter the number that transfer to, and press the send soft key or 3.
  • Page 69 IP410G and IP410C - User Manual 2. A place a call to B, B answer, A press the hold softkey and place a call to C, A cancel the call when C is ringing or answering, then C and B in the same call and the transfer is successful.

  • Page 70: Call Conference

    IP410G and IP410C - User Manual NOTE: If the person that wanted to be spoken to do not want to answer the call, then the person that answered the coming call could use this function. Call Conference This IP Phone supports up to 5-way conference.

  • Page 71: Call Forward

    IP410G and IP410C - User Manual Note: 1. If C does not answer the call, A can back to continue the conversation with B; 2. Once A hangs up the call, the conference is ended, while if B or C drops the call, A&C or A&B conversation continues.
  • Page 72 IP410G and IP410C - User Manual To configure static forward To configure always forward With this feature, all incoming calls will forward immediately to configured number. 1. Press Menu  Features  Call forward Always Forward 2. Press or press to select the enable choice 3.
  • Page 73 IP410G and IP410C - User Manual To configure no answer forward No Answer Forward: Incoming calls are forwarded if not answered after some time. 1. Press Menu  Features  Call forward  No answer forward 2. Press or press to select the enable choice 3.
  • Page 74 IP410G and IP410C - User Manual To configure Forward via Web Interface 1. Setting  Features 2. Click On for the Always/Busy/No Answer 3. Fill the Forward to Number 4. (Optional) fill the on/off code 5. Click to save the configuration...

  • Page 75: Call Return

    IP410G and IP410C - User Manual To cancel the forward feature via Phone Interface 1. Option 1: To press the key to disable the forward feature. 2. Option 2: Press Menu Features Call forward Always/ Busy/ No answer Forward 3. Press...

  • Page 76: Call Waiting Tone

    IP410G and IP410C - User Manual To configure the Call Return via phone interface 1. Press Menu  Features  Function Keys  Line or Memory keys as Function Keys  Memory key1 (for example) 2. Select the wanted Line or Memory key.
  • Page 77 IP410G and IP410C - User Manual To Change the Call Waiting Tone time via Web interface 1. Click Setting  Tones 2. Change the Tone Time as you want (for example 3s)

  • Page 78: Hide Caller Id

    IP410G and IP410C - User Manual Hide Caller ID Just enable the anonymous call feature, you can set your ID do not appear on the other phone that you called. To configure anonymous call 1. Press Menu  Features  Anonymous Call 2.

  • Page 79: Reject Anonymous

    IP410G and IP410C - User Manual Reject Anonymous If you do not want to be disturb by anonymous calls, you can set the reject anonymous call features, so you will not hear the unknown calls To configure rejecting anonymous call 1.

  • Page 80: Dnd

    IP410G and IP410C - User Manual To mute the call during a call (including a conference call) 1. Press the mute key , then the mute key glows green, and the LCD display 2. To disable the mute function, press again.

  • Page 81: Key As Send

    IP410G and IP410C - User Manual To disable DND feature via phone interface: 1. Press the DND soft key again, and then there is no on the LCD. Key as Send To configure Key as Send via phone interface: 1. Press Menu  Features  Key as Send 2.

  • Page 82: Keypad Lock

    IP410G and IP410C - User Manual To configure No Key Entry Timeout via web interface: 1. Click Webpage Setting  Preference 2. Fill the blank of No Key Entry Timeout: for example 5 (seconds). (0 means never timeout), you should press the send key the dial out the number.

  • Page 83: Hot Line

    IP410G and IP410C - User Manual To enable Keypad Lock via Webpage 1. Click Webpage Setting  Features 2. To choose the Phone Lock. 3. To fill the unlock PIN and auto lock time 4. Fill the Emergence Number, when the phone is Lock, only Emergency Number can be sent.
  • Page 84 IP410G and IP410C - User Manual To configure Hotline auto dial via Web Interface 1. Setting  Features 2. Fill the number in the Hotline Number and Hotline Time-out. 3. Click to save the configuration. Delete the number and save the configuration, and then now the Hotline auto dial is cancelled.

  • Page 85: Function Key Features Settings

    IP410G and IP410C - User Manual Function Key Features Settings Line It works same as Line keys. To configure Line Feature via Web Interface 1. Click Function keys  Line or Memory Key 2. Select the wanted Key and set as Line.

  • Page 86: Blf

    IP410G and IP410C - User Manual 4. Press or Save soft key to save the configuration Then the selected Line or Memory key will work as Speed Dial. To configure Speed Dial feature via Web Interface 1. Click Function Keys  Line or Memory key.
  • Page 87 IP410G and IP410C - User Manual 3. Press or press key to select the BLF in the type field. 4. Enter the targeted Value Number. 5. Press or press key to select the Account ID. 6. Enter the Pickup Code.

  • Page 88: Blf List

    IP410G and IP410C - User Manual BLF List To configure BLF List via web interface: 1. Login and click Account 2. Click Advanced and then fill the Event list BLF URL. 3. To configure BLF List Keys 3.1 Click Function Keys Memory Key 3.2 Select the BLF List in the Type Field.

  • Page 89: Voice Message

    IP410G and IP410C - User Manual Voice Message This phone supports Voicemail, and when there is message, the message will will light green. Moreover, when pick up the handset, or press speaker key, you will hear some quick busy tone.

  • Page 90: Direct Pickup

    IP410G and IP410C - User Manual To configure a Voice mail key by phone interface: 1. Press Menu  Features  Function Keys  Line or Memory keys as Function Keys  Memory key1 (for example) 2. Select the targeted Line or Memory key.

  • Page 91: Group Pickup

    IP410G and IP410C - User Manual Group Pickup With this feature, you can pick up the specified group that you want incoming calls. To configure the Pickup via phone interface 1. Press Menu  Features  Function Keys  Line or Memory keys as Function Keys  Memory key1 (for example) 2.

  • Page 92: Call Park

    IP410G and IP410C - User Manual Call Park With this feature, you can put a call on hold and continue the conversation from another phone. To configure the Call Park via phone interface 1. Press Menu  Features  Function Keys  Line or Memory keys as Function Keys  Memory key1 (for example) 2.

  • Page 93: Intercom

    IP410G and IP410C - User Manual Intercom When use the intercom feature, you can quickly get access connect to the configured one. To configure intercom feature via phone interface 1. Press Menu  Features  Function Keys  Line or Memory keys as Function Keys  Memory key1 (for example) 2.

  • Page 94: Dtmf

    IP410G and IP410C - User Manual Note：This feature is not available on all servers. For more information, contact your system administrator. DTMF When the key is configured as DTMF key, you are allowed to send out the desired DTMF number during the conversation.

  • Page 95: Prefix

    IP410G and IP410C - User Manual 5. Press or Save soft key to save the configuration To configure the DTMF via Web interface 1. Click Function Keys  Line or Memory key 2. Select the desired Line or Memory key and select DTMF in the Type.

  • Page 96: Local Group

    IP410G and IP410C - User Manual To configure the Prefix via Web interface 1. Click Function Key  Line or Memory key 2. Select the desired Line or Memory key and select Prefix in the Type. 3. Fill the value.

  • Page 97: Xml Group

    IP410G and IP410C - User Manual To configure the Local Group via Web interface 1. Click Function Key  Memory Key 2. Select the desired Key and select Local group in the Type. 3. Click the to save the configuration.

  • Page 98: Ldap

    IP410G and IP410C - User Manual To configure the XML Group via Web interface 1. Click Function Key  Memory Key 2. Select the desired Key and select XML group in the Type. 3. Click the to save the configuration.

  • Page 99: Xml Browser

    IP410G and IP410C - User Manual XML Browser You can use this key feature to access the Xml browser quickly. The Xml browser allows you to create custom services which meet your functional requirements on the server. You can customize practical applications, such as weather report, stock information, Google search, etc.

  • Page 100: Broadsoft Group

    IP410G and IP410C - User Manual Broadsoft Group When use the BroadSoft Group feature, press the key and enter the Remote Contacts interface quickly. To configure the Broadsoft group via Phone Interface 1. Press Menu  Features  Function Keys  Memory keys as Function Keys  Memory key1 (for example) 2.

  • Page 101: Conference

    IP410G and IP410C - User Manual Conference The Positron IP Phone supports up to 5-way conference. You are allowed to configure the programmable key to be used as a conference key. This key works same as To configure the Conference via Phone Interface 1.

  • Page 102: Transfer

    IP410G and IP410C - User Manual Enter the Value with the number you want to forward Click the to save the configuration. Transfer You are able to configure the key as a transfer key to perform the Blind/Attended Transfer. To configure the Transfer via Phone Interface 1.

  • Page 103: Group Listening

    IP410G and IP410C - User Manual To configure Hold via Web Interface 1. Click Function Keys  Memory Key 2. Select the desired Key and select Hold in the Type. 3. Click the to save the configuration. Group Listening With this feature, you can use Headset, Handset and speaker at the same time.

  • Page 104: Redial

    IP410G and IP410C - User Manual To configure DND via Web Interface 1. Click Function Keys  Memory Key. 2. Select the desired Key and select DND in the Type. 3. Click the to save the configuration. Redial If the key is configured as Redial key, you can redial the last placed call from the IP Phone.

  • Page 105: Record

    IP410G and IP410C - User Manual Set SMS Memory Key To configure the SMS via Phone Interface 1. Press Menu  Features  Function Keys  Memory keys as Function Keys  Memory key1 (for example) 2. Select the wanted Memory key.
  • Page 106 IP410G and IP410C - User Manual 3. Press or press key to select the Record. 4. Press or Save soft key to save the configuration To configure the record via Web Interface 1. Click Function keys  Line or Memory key 2.

  • Page 107: Url Record

    IP410G and IP410C - User Manual URL Record The phone sends HTTP URL request to trigger a recording. Contact your system administrator for the predefined URL. To configure the URL record via phone interface 1. Press Menu  Features  Function Keys  Memory keys as Function Keys  Memory key1 (for example) 2.

  • Page 108: Shared Line

    IP410G and IP410C - User Manual Shared Line This feature allows subscribers to share SIP lines, it also provides status monitoring of the shared line. To configure the line key as shared line via phone interface 1. Press Menu  Features  Function Keys  Line or Memory keys as Function Keys  Memory key1 (for example) 2.

  • Page 109: Public Hold

    IP410G and IP410C - User Manual Public Hold The key can be configured as a public hold key. During a conversation, all members belonging to that particular SLA group can use this key to hold or resume a call. To configure the Public hold via phone interface 1.

  • Page 110: Private Hold

    IP410G and IP410C - User Manual Private Hold The key can be configured as a private hold key. During a conversation, all members belonging to that particular SLA group can use this key to hold the call, but only the initiator can resume the call.

  • Page 111: Upgrade

    IP410G and IP410C - User Manual Upgrade Factory Reset To set Factory Reset by phone interface 1. Press Menu  Setting  Advanced Setting (default password: admin)  Factory Reset 2. Press OK soft key in the warning page. To set Factory Reset via web interface 1.

  • Page 112: System Log

    IP410G and IP410C - User Manual System Log To download system log via web interface: 1. Click Management  Configuration 2. Click of the system Log 3. Then you’ll get a txt file: syslog.txt.

  • Page 113: Upgrade

    TFTP process may take as long as 1 to 2 minutes over the Internet or just 20+ seconds if it is performed on a LAN. Users are recommended to conduct TFTP upgrade in a controlled LAN environment if possible. For those who do not have a local TFTP server, Positron provides a NAT-friendly TFTP server on the public Internet for firmware upgrade.
  • Page 114 IP410G and IP410C - User Manual NOTES: When Positron IP Phone boot up, it will send TFTP or HTTP request to download configuration files, there are two configuration files, one is “pos.txt” and the other is “pos001fc1xxxxxx”, where “001fc1xxxxxx” is the MAC address of the phone. These two files are for initial automatically provisioning purpose only.

  • Page 115: Configuration File

    IP410G and IP410C - User Manual Configuration File To download configuration file: 1. Click Management  Configuration  Download Device Bin Configuration 2. Then you can get a file: cfg.bin To Restore configuration file: 1. Click Management  Configuration  Restore configuration 2.

  • Page 116: Troubleshooting

    IP410G and IP410C - User Manual Troubleshooting Why is the phone LCD screen blank? 1. Ensure your phone is properly plugged into a functional AC outlet. 2. Ensure that the phone isn’t plugged into a plug controlled by a switch that is off.
  • Page 117 IP410G and IP410C - User Manual How to download XML Configuration?  Click Management Configuration How to Import TLS certificate?  Click Management TLS Certs  Click Choose file to select the certificate  Click...
  • Page 118 4. LLDP Feature on Positron IP Phones 5. Supported TLVS of IP Phones 6. Configuring LLDP Feature 7. DHCP VLAN 8. Open the DHCP VLAN on the Positron IP Phones 9. VLAN under Bridge Mode 10. VLAN underNAT Mode How to Set LCD and Web GUI ...

This manual is also suitable for:

Ip410c

Table of Contents