Function Of Control Button - LG LD-2131WH Owner's Manual

FUNCTION OF CONTROL BUTTON

TIME LEFT
• Before starting, the display window shows the running time of
the selected program.
• After starting, the display window shows the remaining time.
• If the dishwasher has a trouble, the trouble type is displayed.
: Drainage trouble
: Problem of overfilling water
: Water inlet trouble
: Water leakage trouble
: Heater trouble
If this error letters are displayed, please refer to the trouble
shooting guide page 20 and follow the guide.
" " : No error message (See page 17)
HALF LOAD
• In case of small load,
use upper or lower rack
only to save energy.
• With each press, can
select upper or lower
rack only.
• In case you don't select
this button, the
machine always works
vario washing, which
operate upper and
lower spray arm
alternately.
EXTRA
CHILD LOCK
HOT
• When select • Used to lock or unlock
Extra Hot
the control buttons to
function, the prevent all the setting
operating from being changed by
temperature a child.automatically
will be up to canceled when power
77 . failure occur.
• For locking/ unlocking,
press Intensive and
Auto button for a few
seconds simultaneously.
DELAY INDICA
START
• If you want to
delay the start of
selected program,
press this button
before pressing
program button.
• Pressing this
button will
increase time by
1 hour.
• The delay start
time can be
adjusted from 1
hour to 19 hours.
BEEP ON/OFF
• The dishwasher must be
switched on.
• The beep on/off function
can be set by pressing the
Quick and Pre-wash
button simultaneously for a
few seconds. then, a "on"
will appear in the time
display.
• The beep on/off function is
automatically canceled when
power failure occur.
10
POWER
TOR
• Refill • For operating, press
with this button first for
special power on.
salt • After operating, this
button automatically
• Refill switches off for safety
with and energy saving.
rinse • In case of irregular
aid surge disturbance to
the machine, the
power may be
automatically turned
off for safety.
PROGRAM
• When you want to
select program,
press each button.