Accessories - Siemens LR97CAQ50 User Manual And Installation Instructions

en Customer Service
Fault
Remote control not
working.
In the LED display,
the LEDs flash one to
five times after the
appliance is switched
off.
The lighting automat-
ically switches on as
soon as the appli-
ance is connected to
the power supply.
LED 1 flashes in the
LED display.
LED 2 flashes in the
LED display.
13 Customer Service
If you have any queries on use, are unable to rectify
faults on the appliance yourself or if your appliance
needs to be repaired, contact Customer Service.
Function-relevant genuine spare parts according to the
corresponding Ecodesign Order can be obtained from
Customer Service for a period of at least 10 years from
the date on which your appliance was placed on the
market within the European Economic Area.
Note: Under the terms of the manufacturer's warranty
the use of Customer Service is free of charge.
Detailed information on the warranty period and terms
of warranty in your country is available from our after-
sales service, your retailer or on our website.
If you contact Customer Service, you will require the
product number (E-Nr.) and the production number
(FD) of your appliance.
The contact details for Customer Service can be found
in the enclosed Customer Service directory or on our
website.
This product contains light sources from energy effi-
ciency class G. These light sources are available as a
spare part and should only be replaced by trained spe-
cialist staff.
14 Accessories
Only use original accessories. These have been made
especially for your appliance. Here you can find an
overview of your appliance's accessories and how to
use them.

Accessories

CleanAir recirculation
module with easy-change
filter – cannot be regener-
ated, stainless steel
14
Cause and troubleshooting
The batteries are flat.
→ "Replacing the batteries in the remote control", Page 13
▶
The batteries are almost empty.
→ "Replacing the batteries in the remote control", Page 13
▶
Demo mode is switched on.
Press and hold and
▶
The grease filters are saturated.
→ "Cleaning grease filters in the dishwasher", Page 12
▶
→ "Cleaning grease filters manually", Page 12
▶
The odour filters are saturated.
Change the odour filter.
▶
Order number
LZ21JCC56
for approx. three seconds.
13.1 Product number (E-Nr.) and production
number (FD)
You can find the product number (E-Nr.) and the pro-
duction number (FD) on the appliance's rating plate.
Depending on the model, the rating plate can be found:
¡ Inside the appliance (remove grease filters for ac-
cess).
¡ On top of the appliance.
Make a note of your appliance's details and the Cus-
tomer Service telephone number to find them again
quickly.
Accessories
CleanAir recirculation
module with easy-change
filter – cannot be regener-
ated, stainless steel
CleanAir recirculation
module with easy-change
filter – can be regener-
ated, white
CleanAir recirculation
module with filter – can
be regenerated, white
Order number
LZ20JCD50
LZ21JCC26
LZ20JCC20