Huawei ETS2028 User Manual page 32

contacts saved in the FWT to a message group.
Select Menu > Messages > Message Settings >
1.
Group Settings.
Press the Up/Down key to scroll up or down the message
2.
groups.
Press (Options) to select View, Add, Rename or
3.
Delete All.
Setting the Auto Save Function
Select Menu > Messages > Message Settings > Auto Save to
set the auto save function. You can select:
Send And Save: Activate the auto save function. Messages
are automatically saved after being sent. Messages sent
successfully are saved to the outbox. Messages not sent are
saved to the draft.
Send Only: Deactivate the auto save function.
Setting the Auto Delete Function
Select Menu > Messages > Message Settings > Auto Delete.
On: Activate the auto delete function. If the memory in use is
full and there is a new message, the FWT automatically
deletes the earliest message.
Off: Deactivate the auto delete function. If the memory in use
is full, the FWT cannot receive messages. You need to delete
some messages manually. Then the FWT can receive new
messages.
Setting the Priority
Select Menu > Messages > Message Settings > Priority. You
can set the sending sequence of messages from the short
message service center (SMSC). The priority level from low to
high is normal, urgent, and emergency.
28