Validating - Huawei ETS2028 User Manual

According to the distance between the two hooks (7.7 cm),
2.
hammer two nails into the wall with 3 mm end left out.
7.7cm
Snap the hooks to the nails.
3.

Validating

After installing the FWT, you can make a call to check whether it
is correctly installed.
Press and hold
1.
the FWT to the power socket, the
indicating that the FWT is powered normally.
Lift the handset. In the standby mode, the signal strength
2.
icon appears normally.
If you are able to make a call, it indicates that the FWT is
3.
installed correctly.
18
to power on your FWT. After connecting
icon appears,