Technibel MCAV127C5VAB Technical Data & Service Manual page 32

(3) Remove the 6 screws of the front panel and pull it
toward you. (Fig. 9)
(4) Remove the 2 screws used to mount the
evaporator. (Fig. 10)
(5) Remove the rubber cap to pull the thermistor out of
the evaporator. (Fig. 10)
(6) Cut the plastic clamp securing the drain hose to the
front fan casing. (Fig. 10)
(7) The evaporator is built into the drain pan. Pull out
the drain pan together with the evaporator in the
direction of the arrow. (Fig. 10)
IMPORTANT
The foamed polystyrene drain pan is fragile: DO
NOT apply excessive force when removing it.
(8) The evaporator can be removed by sliding it out
from the drain pan in the direction of the arrow.
(Fig. 11)
Front panel
Drain pan
Screw
Mounting
plate
Evaporator
(Indoor coil)
Drain pan
29
Screw
Rubber cap
Thermistor
Front
fan casing
Drain hose
Plastic clamp
Mounting
plate
Fig.9
Fig.10
Fig.11