Setup The Wireless System; Assembling And Connecting To The Speakers - LG HT502THW-D1 Owner's Manual

Setup the Wireless System

Note:
If there is a strong electromagnetic wave product
nearby, an interference may be occurred. Put the unit
(Wireless Receiver and main unit) away from there.
(Ex : Micro wave oven)
Wireless transmitter
LED indicator of wireless transmitter
* LED indicator - "BLUE"
The main set is turned on, everthing is connected
and transmitting.
* LED indicator - "RED"
The wireless transmitter is in standby mode.
* LED indicator - "OFF (No display)"
The main set is turned off.
SIGNAL ID./CH. DC IN
10
Wireless Receiver
LED indicator of Wireless Receiver
* LED indicator - "BLUE"
LED indicator
The Wireless Receiver is receiving a signal of
Displays the operating
wireless transmitter.
status.
* LED indicator - "RED"
The Wireless Receiver is in standby mode.
Assembling and Connecting to
the Speakers
The speakers are detached from the speaker stands.
DC IN connector
Connect the speaker cables and assemble the front and
rear speakers from speaker stands as illustrated.
ID (ID.)
button
How to connect the Speakers
SOUND SIGNAL
1. Set the speaker on the stand.
connector
2. Fix the speaker and the stand by inserting the 4 screws
3. Connect the speaker cables to the appropriate terminal
LED indicator
Displays the operated
status.
Rear speaker connector
Power cord
(4 mm) in the speaker hole.
on the bottom of the round board.