Table of Contents
Advertisement
ADJUSTING THE DIRECTION OF AIR CIRCULATION
Instructions relating to heating (*) are applicable only to "HEAT & COOL MODEL" (Reverse Cycle).
Vertical (up-down) direction of airflow is adjusted by pressing the remote control unit's AIR FLOW DIRECTION VERTICAL SET
button. Horizontal (right-left) direction of airflow is adjusted by pressing the remote control unit's AIR FLOW DIRECTION
HORIZONTAL SET button.
Vertical Air Direction Adjustment
Press the AIR FLOW DIRECTION VERTICAL SET button .
Each time the button is pressed, the air direction range will change as follows:
1
Types of Air flow Direction Setting:
1,2,3
:
During Cooling/Dry Modes
1,2,3,4,5 : *During Heating mode
The remote control unit's display does
not change.
G Use the air direction adjustments within the ranges shown above.
G The vertical airflow direction is set automatically as shown, in accordance with
the type of operation selected.
Horizontal flow 1
Downward flow 5
G During AUTO mode operation, for the first minute after beginning operation,
airflow will be horizontal 1; the air direction cannot be adjusted during this pe-
riod.
Horizontal Air Direction Adjustment
Press the AIR FLOW DIRECTION HORIZONTAL SET button .
Each time the button is pressed, the air direction range will change as follows:
1
The remote control unit's display does
not change.
G Use the air direction adjustments within the ranges shown above.
1 2
Fig. 9
2
3
4
5
Fig. 8
:
During Cooling/Dry mode
: * During Heating mode
2
3
4
5
RIGHT/LEFT
air direction louvers
3
5
4
G Never place fingers or foreign objects in-
G Always use the remote control unit's
1
2
3
4
5
G During use of the Cooling and Dry
G When used in a room with infants, chil-
Example: When set to vertical air direc-
Example: When set to horizontal air di-
DANGER!
side the outlet port could cause personal
injury.
AIR FLOW DIRECTION button to adjust
the UP/DOWN air direction flap or
RIGHT/LEFT air direction louvers. At-
tempting to move them manually
could result in improper operation; in
this case, stop operation and restart.
The louvers should begin to operate
properly again.
modes, do not set the UP/DOWN air
direction flap in the range 4 to 5 for
long periods of time, since water vapor
may condense near the outlet port and
drops of water may drip from the air
conditioner.
dren, elderly or sick persons, the air
direction and room temperature
should be considered carefully when
making settings.
SET
SWING
SET
SWING
TIME
TEST
ENAGY
ADJUST
RUN ACL
SAVE
tion.
SET
SWING
SET
SWING
TIME
TEST
ENERGY
ADJUST
RUN ACL
SAVE
rection.
11
Advertisement
Table of Contents
