Advertisement
Centrifuge
Model XC-1000
Operating Manual
Before using this product, please read this manual carefully to learn about the available
features to obtain the best results of this equipment.
Warning: To prevent fire or shock hazard, do not expose this unit to rain or moisture. Unless
labeled otherwise, this equipment should be used with AC 110V 60Hz in the USA or Canada.
220V 50Hz available as Model No. XC-1000-220
Caution: No user-serviceable parts inside. Refer servicing to qualified service personnel
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for premiere XC-1000
Summary of Contents for premiere XC-1000
- Page 1 Warning: To prevent fire or shock hazard, do not expose this unit to rain or moisture. Unless labeled otherwise, this equipment should be used with AC 110V 60Hz in the USA or Canada. 220V 50Hz available as Model No. XC-1000-220 Caution: No user-serviceable parts inside. Refer servicing to qualified service personnel...
- Page 2 1.1 Table of Contents Section • Table of Contents Page 1 • Safety Page 2 • Contents/Accessories Page 3 • Specifications Page 4 • Notes of Operations Page 5 • Control Panel/Setup Page 6 • Operations Page 7 • Warranty Page 8...
- Page 3 2.1 Safety Before using the centrifuge, please read this instruction manual carefully. Incorrect or inappropriate use may result in equipment damage or personal injury! This centrifuge is designed for clinical medicine, biology, genetic engineering, immunology, etc. When the centrifuge is running (rotor is spinning), Please keep an area of about 12 inches around the centrifuge clear while operating it and ensure nothing is blocking the vents.
- Page 4 3.1 Contents Number Name Note Centrifuge 1set Rotor (included) 12pc (six included inside unit & Capacity =< 10-15mL x 6 tube holders six extra) Black silicone tube cushions Fuse 4 AMP Operating manual Upon receipt, please examine the package, if there's anything wrong, please kindly contact your dealer promptly.
- Page 5 4.1 Specifications Technical Data Function/ Parameter • Clean, dry and flat surface • Stable work surface Environment of use • Altitude: • Relative humidity:≤80% • +5°C~-40°C Ambient Temperature • AC110V 60Hz or 220V 50Hz Applicable Voltage • 1~60min Setting Time Range •...
- Page 6 5.1 Notes of Operation ● Ensure the rotor is tightened before running the centrifuge. ● Do not open the lid while the rotor is spinning. Allow centrifuge to come to a complete stop before attempting to open lid and remove specimen tubes. ●...
- Page 7 6.1 Control Panel Control Panel Time LED： Time in min + -：increase/decrease time On/Off： run/stop 6.2 Setup 1. Open box and remove centrifuge from packaging 2. Place centrifuge onto flat surface 3. Open lid and remove foam packaging inside 4. Plug Power cord from back of unit into power supply, unit will power up and your centrifuge is ready for use.
- Page 8 7.1 Operations Time Adjustment 1. Push the “+” or “-” button to adjust the time setting. To increase the run time push the “+” button until desired time reached or maximum of 60 minutes. (See section 6.1). To decrease the run time push the “-” button until desired time reached or minimum of 1 min.
Need help?
Do you have a question about the XC-1000 and is the answer not in the manual?
Questions and answers