When You Return To The Previous Menu, Press Back; Press The Navigation Buttons To Scroll To The Setting Or Option You - LG LF45 Series Owner's Manual

y Mono sound selection
y
If the stereo signal is weak in stereo reception, you can switch to
mono. In mono reception, the clarity of sound is improved.
y Language selection for dual language broadcast
y
If a programme can be received in two languages (dual
language), you can switch to DUAL I, DUAL II or DUAL I+II.
DUAL I
Sends the primary broadcast language to the
loudspeakers.
DUAL I I Sends the secondary broadcast language to the
loudspeakers.
DUAL I+I I Sends a separate language to each loudspeaker.
Nicam Reception
If the TV is equipped with a receiver for NICAM reception, high quality
NICAM (Near Instantaneous Companding Audio Multiplex) digital sound
can be received.
Sound output can be selected according to the type of broadcast
received.
1 When NICAM mono is received, you can select NICAM MONO or
FM MONO.
2 When NICAM stereo is received, you can select NICAM STEREO or
FM MONO.
If the stereo signal is weak, switch to FM MONO.
3 When NICAM dual is received, you can select NICAM DUAL I,
NICAM DUAL II or NICAM DUAL I+II or FM MONO.
Speaker Sound Output Selection
In AV, Component, HDMI mode, you can select output sound for the left
and right loudspeakers.
Select the sound output.
L+R:
Audio signal from audio L input is sent to the left
loudspeaker and audio signal from audio R input is sent
to the right loudspeaker.
L+L:
Audio signal from audio L input is sent to left and right
loudspeakers.
R+R:
Audio signal from audio R input is sent to left and right
loudspeakers.
30
TIME settings
1 Press SETTINGS and the Navigation buttons to scroll to TIME.

2 Press the Navigation buttons to scroll to the setting or option you

want and press OK .
3 When you return to the previous menu, press
* Image shown may differ from your TV.
TIME
Clock
Off Time
: Off
On Time
: Off
Sleep Timer
: Off
Automatic Standby
: 4 hours
Auto Off(On Time) : Off
The available time settings are described in the following.
Setting
Clock
Sets the time.
Sets the time to turn on or off the TV
automatically. To use this function, you
should set the current time and date in
advance.
NOTE
Off Time /
On Time • If you do not press any button within 2
hours after the TV turns on by the On
Time feature, the TV enters the Standby
mode automatically.
• If you set both Off Time and On Time
features to the same time, the Off Time
feature overrides the On Time feature.
Sets the length of time until the TV to turns
off. When you turn the TV off and turn it
Sleep Timer
on again, the Sleep Timer feature will be
set to off.
Automatic
If you do not press any button on the TV or
Standby
remote control for a certain period, the TV
(Depending on
will automatically switch to standby mode.
model)
If On Time is enabled, the TV will be turned
Auto Off(On Time)
on at the specified time. If you do not operate
(Depending on
the TV for two hours, the TV will be turned off
model)
automatically.
BACK
Move Move OK OK
Description