Heating Specifications
Heat Output
1
Heating Capacity
2
Fuel Burn Rate
3
Burn Time (lowest setting)
Hopper Capacity
BTU output will vary depending on the quality of fuel. Use PFI listed fuels for the best results.
1
Heating capacity will vary depending on floor plan layout of your home, degree of insulation, and the outside temperature.
2
Pellet size may effect the actual rate of fuel feed and burn times. Fuel feed rates may vary by as much as 20%. Use PFI listed fuel for best results.
3
Dimensions
Height
Width
Depth
Weight
Electrical Specifications
Electrical Rating
Watts (operational)
Watts (igniter running)
FuEL CONSidErATiONS
Your King/Ashley stove is designed to burn premium hardwood pellets that comply with Association of Pellet Fuel
Industries standards. (Minimum of 40 lbs density per cubic ft, 1/4" to 5/16" diameter, length no greater than 1.5", not less
than 8,200 BTU/lb, moisture under 8% by weight, ash under 1% by weight, and salt under 300 parts per million). Pellets
that are soft, contain excessive amounts of loose sawdust, have been, or are wet, will result in reduced performance.
SAFETy ANd EPA COMPLiANCE
Your King/Ashley stove has been safety tested and listed to ASTM E 1509, (UM) 84-HUD by OMNI-Test Laboratories,
Inc. Portland, Oregon, USA. It is also certified and tested to EPA Phase II requirements.
4
Specifications
48,000 BTU/hr.
800 - 2,000 sq. ft.
2.0 - 6.0 lbs./hr.
5500/5500M - 60 hrs. 5500XL - 160 hrs.
5500/5500M - 150 lbs. 5500XL - 320 lbs.
5500/5500M
5500XL
34 in.
47 1/4 in.
26 in.
26 in.
25 in.
25 in.
250 lbs.
275 lbs.
110-120 volts, 60 HZ, 3.0 Amps
175 (approx.)
425 (approx.)
USSC