Table of Contents
Advertisement
TROUBLESHOOTING
PROBLEM
Appliance does not operate.
Appliance is not cold enough.
Appliance too cold.
Turns on and off frequently.
Vibrations.
Condensation on front of door.
Moisture on exterior of appliance.
The door will not close properly.
Ice formation on the inner rear wall. • The door gasket does not seal properly.
POSSIBLE CAUSE
• Not plugged in.
• The circuit breaker tripped or there is a blown
• Check the temperature control setting.
• The door is opened too often.
• The door is not closed completely.
• The door gasket does not seal properly.
• Check temperature setting.
• The room temperature is too cold.
• The room temperature is hotter than normal.
• The door is opened too often.
• The door is not closed completely.
• The temperature control is not set correctly.
• Check to assure that the appliance is level.
(See "Installation" section).
• Room environment is too humid.
• Normal during periods of high humidity – wipe dry.
• The appliance is not level.
(See "Installation" section).
• The gasket is dirty.
• The shelves are out of position.
• The door is opened too often or for too long.
8
Advertisement
Table of Contents
