Connecting to a smartphone
If you are using an iOS
device
(iPhone, iPod touch,
iPad)
Use a QR code to make
settings easily (→61)
●
You can also connect by manually entering the password. (→62, 63)
If you are using an iOS device (iPhone, iPod touch, iPad)
■
When reading a QR Code to connect
(Steps
to
are not necessary when reconnecting.)
(On the camera)
Press and hold the [Wi-Fi] button
(On your smartphone)
Start "Image App"
Select [QR Code] → [OK]
Read the QR Code displayed on this unit with "Image App"
(When you press [MENU/SET] on the camera, the QR code is displayed in
an enlarged size.)
Install the IMAGE APP profile
Press the home button to close the Web browser
∗
Select [Wi-Fi]
Turn on [Wi-Fi]
Return to the home screen and start "Image App"
∗
The display may differ depending on the system language setting.
If you are using an Android device
Is your device equipped with an NFC function?
Use the NFC function
to connect (→62)
∗
Select [Install]
• The message is displayed in the Web browser.
• If a passcode is required to unlock the smartphone,
you will have to input the passcode.
∗
under [Settings]
on the smartphone
∗
and select the SSID displayed on this unit
Yes
, then select [Install Now]
Wi-Fi
No
Read a QR code to
connect (→62)
∗
∗
→ [Done]
.
SQT0382 (ENG)
61