Checking The Effects Of The Aperture Value And Shutter Speed ([Preview] Mode) - Panasonic LUMIX DMC-LX100GN Basic Operating Instructions Manual

Basics
About T (time)
When you set the shutter speed to T (time) and fully press the shutter button, the
shutter opens. (Approximately up to 120 seconds)
When you press the shutter button again, the shutter closes. Use this function
when you want to keep the shutter open for an extended period, for example, to
record pictures of fireworks or night scenes.
• You cannot use this function when the electronic shutter is used.
• You can use this function only in [Manual Exposure] Mode.
●
When you take pictures with the shutter speed set to T (time), we
recommend using remote recording with a tripod or smartphone as a
remote shutter release (→63), in order to prevent jitter.
●
When you take still pictures with the shutter speed set to T (time), the
pictures may have higher noise levels. If you want to suppress noise,
we recommend taking pictures by setting [Long Shtr NR] to [ON] in the
[Rec] menu.
Checking the effects of the aperture value and shutter
speed
([Preview] Mode)
Recording mode:
1
Assign [Preview] to the function button (→20)
• The following step is an example of assigning [Preview] to the [Fn1]
button.
2
Press the [Fn1] button to switch the confirmation screen
• Every time you press the [Fn1] button, the screen switches.
Normal recording
screen
32
SQT0382 (ENG)
Effect of aperture
value
Effect of shutter
speed