Installation
Installing the unit on a Left-Hand-Drive Car.
• When the unit is installed on a Right-Hand-Drive car, the horizontal
position are inverted.
a
1. Secure Cover holder
to the inner circumference of the steering
b
wheel with belt
.
a
Fit the Cover holder
to the steering wheel so that the arrow-marked
side faces the driver as shown by picture.
b
2. Cut the extra portion of the belt at the center of the cover holder.
3. Install the remote control unit
4. When removing the remote control unit from the holder, move the
a
corrugated release section toward the steering wheel as far as possi-
ble before sliding the remote control unit toward you.
c
in the holder.
c
CAR CD/MP3/WMA Receiver
25