Summary of Contents for Campania International 144533-01 Series
Page 1
144533-XX01 Boden Fountain Assembly Instructions Fountain Information: • This fountain holds approximately 10 gallons of water. • This fountain uses a small fountain cover: FTNCOV-SM • Not compatible with #7 or #10 refill device or LED-lights. Pump Information: OEMPF140-140 GPH Pump (6 ft. cord length) Tools Required: Bubble Level Screwdriver...
Page 2
144533-XX01 Boden Fountain, Short Assembly Instructions Fountain Set-Up: Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is installed properly, please read our instructions and tips before you begin. Step 1 - Seek Professional Help: Check if professional installation is recommended for your fountain.
Page 3
Maintenance: Pump Care - The fountain relies heavily on the quality of the pump. A well-maintained pump can last several years. Step 1 - Fully submerge: Ensure the pump is fully submerged at all times to avoid damage. Step 2 - E nsure water level is sufficient: Check water levels regularly as water may evaporate over time, and periodically change water to avoid algae buildup.