Wall Mounting (Optional) - ViewSonic VX2209-5 User Manual

Wall Mounting (Optional)

NOTE: For use only with UL Listed Wall Mount Bracket with minimum weight/load:
9.9kg.
To obtain a wall-mounting kit or height adjustment base, contact ViewSonic
your local dealer. Refer to the instructions that come with the base mounting kit.
To convert your display from a desk-mounted to a wall-mounted display, do the
following:
1. Verify that the power button is turned OFF, then disconnect the power cord.
2.
Lay the display face down on a towel or blanket.
3. Remove the base (removal of screws might be required).
4. Find and identify one of the following VESA mount interfaces (a,b,c) located
on the back of your display (refer to the "Specifications" page of your display's
mounting interface). Attach the mounting bracket from the VESA compatible wall
mounting kit using screws of the appropriate length.
a.
75mm
75mm
5.
Attach the display to the wall, following the instructions in the wall-mounting kit.
b.
100mm
100mm
5
c.
200mm
100mm
100mm
or
®