The Administration Tab - Factory Defaults; Figure 5-55: Administration Tab - Factory Defaults - Cisco Linksys WRT600N User Manual

Dual-Band Wireless-N Gigabit Router with Storage Link

The Administration Tab - Factory Defaults

The Factory Defaults screen allows you to restore the Router's configuration to its factory default settings.
NOTE: Do not restore the factory defaults unless you are having difficulties with the Router and
have exhausted all other troubleshooting measures. Once the Router is reset, you will have to re-
enter all of your configuration settings.
Factory Defaults
Restore Factory Defaults. To clear all of the Router's settings and reset them to its factory defaults, click the
Restore Factory Defaults button.
Help information is shown on the right-hand side of the screen.
Chapter 5: Configuring the Wireless-N Gigabit Router with Storage Link
The Administration Tab - Factory Defaults

Figure 5-55: Administration Tab - Factory Defaults

51