Table of Contents
Advertisement
12
using the Kensington lock
The connector for the Kensington security system is located at the bottom of
the monitor.
For more information on installation and usage, refer to the Kensington lock
owner's manual or visit the website at http://www.kensington.com.
Connect the monitor to a table using the Kensington security system cable.
noTe
•
The Kensington security system is optional. You can obtain optional
accessories from most electronics stores.
Installing the wall mount plate
This monitor meets the specifications for the wall mount plate or other
compatible devices.
1
Place the screen face down. To protect the monitor panel (screen), cover
the surface with a soft cloth or the monitor protection pad included in the
product package.
2
Remove the four screws tightened on the back of the monitor.
3
Place the wall mount plate onto the monitor and align it with the screw
holes.
4
Tighten the four screws using a screwdriver to fix the plate to the monitor.
noTe
•
The wall mount plate is sold separately.
•
For more information on installation, refer to the wall mount plate's installation
guide.
•
Be careful not to apply too much force while mounting the wall mount plate as
it may cause damage to the screen.
Advertisement
Table of Contents
