Table of Contents
Advertisement
Wireless-G ADSL Home Gateway
• UPnP. To enable UPnP, click Enable. Otherwise, click Disable.
• Please select a PVC connection to bind. Select the number of the PVC over which the applications requiring
UPnP will run.
IGMP-Proxy
If your multimedia application or device is not working properly behind the Gateway, then you can enable IGMP-
Proxy to allow multicast traffic through the Gateway.
• PVC Available. Select the number of the PVC over which you wish IGMP-Proxy to work.
• IGMP Proxy. To use this feature, select Enable. Otherwise, select Disable.
IGMP-Snooping
The multicast packets used by some multimedia applications are treated as broadcast packets and sent to all of
the Gateway's LAN ports. If this results in too much traffic going to ports over which the application is not being
used, you can enable IGMP snooping to ensure correct routing of multicast traffic.
• IGMP Snooping. To use this feature, select Enable. Otherwise, select Disable.
WLAN
• Management via WLAN. This feature allows the Gateway to be managed by a wireless computer on the local
network when it logs into the Gateway's Web-based Utility.
When finished making your changes on this tab, click the Save Settings button to save these changes, or click
the Cancel Changes button to undo your changes.
Chapter 5: Configuring the Wireless-G ADSL Home Gateway
The Administration Tab
43
Advertisement
Table of Contents
