Battery Pack; Storage Recommendations; Package Contents - DeWalt XR LI-ION DCF835C2 Original Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Eng lis h

Battery pack

Battery type
The DCF830 and DCF835 operate on 14.4 volt
battery packs.
The DCF880 and DCF885 operate on 18 volt battery
packs.
The DCB140, DCB141, DCB142, DCB180,
DCB181 or DCB182 battery packs may be used.
Refer to Technical Data for more information.

storage recommendations

1. The best storage place is one that is cool and
dry away from direct sunlight and excess heat
or cold. For optimum battery performance and
life, store battery packs at room temperature
when not in use.
2. For long storage, it is recommended to store a
fully charged battery pack in a cool, dry place
out of the charger for optimal results.
NotE: Battery packs should not be stored
completely depleted of charge. The battery pack will
need to be recharged before use.
labels on Charger and Battery pack
In addition to the pictographs used in this manual,
the labels on the charger and the battery pack show
the following pictographs:
Read instruction manual before use.
Battery charging.
Battery charged.
Hot/cold pack delay.
x
Problem pack or charger.
Problem powerline.
Do not probe with conductive objects.
Do not charge damaged battery packs.
Use only with D
Others may burst causing personal injury
and damage.
8
WALT battery packs.
e
Do not expose to water.
Have defective cords replaced
immediately.
Charge only between 4 °C and 40 °C.
Discard the battery pack with due care for
the environment.
Do not incinerate the battery pack.
Charges Li-Ion battery packs.
See Technical Data for charging time.
Only for indoor use.

package Contents

The package contains:
1 Impact Driver / Wrench
1 Charger
2 Batteries
1 Bit clip ( Driver only )
1 Belt hook
1 Kitbox
1 Instruction manual
1 Exploded drawing
NotE: Battery packs, chargers and kitboxes are not
included with N-models.
• Check for damage to the tool, parts or
accessories which may have occurred during
transport.
• Take the time to thoroughly read and
understand this manual prior to operation.
description (fig. 1, 4)
WARNING: Never modify the power
tool or any part of it. Damage or
personal injury could result.
a. Trigger switch
b. Forward/reverse button
c. Chuck collar

Advertisement

Table of Contents
loading

Table of Contents