Table of Contents
Advertisement
M2752D
If you are not mounting the TV to a wall, use the
following instructions to attach the stand.
1
Place the TV with the screen side down on a
flat and cushioned surface.
2
Attach the Stand Body from the TV.
Insert the two Lockers of the Stand Body right
into the groove of the TV head and secure
them by pressing the left and right bottom
sides.
3
Secure the TV and the Stand Body with the
2 screws.
If you don`t fasten the screw tightly, TV will
fall down and get damaged.
4
Attach the Stand Base from the Stand Body by
turning the screw to the right with a Coin.
Locker
CAUTION
Tighten the screws firmly to prevent the TV
from tilting forward. Do not over tighten.
ASSEMBLING AND PREPARING
WARNING
11
Advertisement
Table of Contents
