Replacement Guide
You can obtain replacements from your local Puretec dealer. To maintain performance,
warranty and standards use genuine Puretec replacements.
To maintain the high quality of the purified water the cartridge(s) need changing every
6 months (this is dependent on water quality and usage). You can obtain replacement
cartridges from your local Puretec stockist. To maintain performance and warranty use
genuine Puretec replacements.
Cartridge Installation / Replacement
To change the filter cartridge(s) please adhere to the following procedure:
1
Turn water supply off and relieve pressure by opening a downstream tap or
pressing the red pressure relief button on the housing(s) (if fitted).
2
Unscrew the filter bowl(s). If difficult to undo, use the wrench provided. Remove old
cartridge(s). We recommend replacing O-rings every 3 - 5 years to ensure a water
tight seal, preventing any leaks.
WH Replacements
WH1-30
WH1-60
WH2-30 / WH2-35
WH2-55 / WH2-60
EM Replacements
EM1-60
EM1-110
EM2-60 / EM2-65
EM2-75 / EM2-80
EM2-100 / EM2-110
EM2-140 / EM2-150
Replace cartridges every 6 - 12 months.
Whole House Water Filtration Systems
Maintenance
A
CB10MP1
CB10MP2
PX05MP1
PX05MP2
A
B
DP10MP1
N/A
DP10MP2
N/A
PL05MP1
DP10MP1
PL20MP1
PX01MP1
PL05MP2
DP10MP2
PL20MP2
PX01MP2
B
N/A
N/A
CB10MP1
CB10MP2
5