Viking K-1900-6-IP Product Manual page 17

Table of Contents

Control Relay Contacts Across a Local Area Network

The RC-4A Network Enabled Relay Controller provides networked control

of four relays via an easy-to-use web interface. The same interface can

be used to check the status of four contact closure inputs. Relays can be

toggled on or off, or user-programmed timed closures can be activated.

The RC-4A can be configured to work as a remote relay for Viking VoIP

series entry phones, controlling door strikes and gates when a remote

relay is required for security reasons. It can also be programmed to send

an email or text message in response to a change in one or more of the

sensor inputs. Two RC-4A's can be set up so that activity on a sensor

input of one unit will automatically send a message across the network to

activate one of the relays on the other unit. Two levels of user access

permit selected users to have full operational and programming rights

while others have operational control but not programming capability.

with Auto Dialer, Keypad and Entry System

The K-1900-8-IP VoIP panel phone can either auto-dial a phone number each time the handset

is lifted, be used as a multi-number auto-dialer, or be used as a standard manual dial phone.

The K-1900-8-IP VoIP phone is designed to provide quick and reliable communication for SIP

VoIP phone systems with PoE. The unit can be programmed from any PC on the same LAN

or remotely using a Static IP Address. The K-1900-8-IP phone can dial up to 250

programmable numbers and another 250 rollover numbers.

When a call initiated by the K-1900-8-IP phone is answered by an apartment or business

tenant, a built-in contact closure may be activated to control an electric gate or door strike. Up

to 1,000 keyless entry codes may be programmed, providing tenants with keyless entry. A 26

Bit Wiegand input is provided for adding an optional proximity card reader with capacity to

program up to 1,000 card numbers. Keyless entry codes and card numbers can be

programmed to only allow access at specific times and/or day of the week. A request for exit

(REX) input is included for easy exiting. The K-1900-8-IP also has automatic event logging

allowing you to review the time and date of the call, which door was open/closed, what keyless

entry code or proximity card was used, request for exit usage and whether it was an inbound

or outbound call.

The K-1900-8-IP-EWP shares all of the features of the K-1900-8-IP in addition to Enhanced

Weather Protection (EWP) for outdoor installations where the unit is exposed to precipitation

or condensation. EWP products feature foam rubber gaskets and boots, sealed connections,

gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards. For more

information on EWP, see DOD 859.

K-1900-7-ip K-1900-6-ewp K-1900-7-ewp