Table of Contents
Advertisement
DR389-W_BARELLK
2/15/08
1:47 PM
Troubleshooting
General
The power does not turned on.
b
Plug the power cord into the wall outlet securely.
There is no picture.
b
Select the appropriate video input mode on the TV so the picture from the
unit appears on the TV screen.
b
Connect the video connection securely.
Picture noise appears.
b
You are playing a disc recorded in a color system that is different form
your TV.
b
The video signal from the external component is copy-protected.
b Set the resolution that your TV can accepts.
The channel is not found or stored.
b
Check your antenna connection.
There is no sound.
b
Connect the audio connection securely.
b
The input source setting on the amplifier or the connection to the amplifier
is incorrect.
b
The unit is in scan, slow motion, or pause mode.
The remote control does not work properly.
b
The remote control is not pointed at the remote sensor of the unit.
b
The remote control is too far from the unit.
b
There is an obstacle in the path of the remote control and the unit.
b
The batteries in the remote control are exhausted.
Playback
The unit does not start playback.
b
Insert a playable disc. (Check the disc type, color system, and regional
code.)
b
Place the disc with the playback side down.
b
Place the disc on the disc tray correctly inside the guide.
b
Clean the disc.
b
Cancel the Rating function or change the rating level.
Page 29
Cannot play a disc recorded using this unit on other player.
b
b
b
b
The angle cannot be changed.
b
b
The subtitle language cannot be changed or turned off.
b
b
Cannot shows a disc menu of Video CD
b
b
Cannot play MP3/WMA/JPEG/DivX files.
b
b
b
Recording
Cannot record or does not record successfully.
b
b
b
b
Timer record does not record successfully.
b
b
b
b
Stereo Audio Record and/or Playback is not present.
b
b
b
Finalize the disc.
Check the disc compatibility of the player.
Place the disc on the disc tray correctly inside the guide.
Discs recorded with copy-once material cannot be played on other
players.
Multi-angles are not recorded on the DVD Video being played.
The angle cannot be changed for the titles recorded on this unit.
Subtitles are not recorded on the DVD Video being played.
The subtitle cannot be changed for the titles recorded on this unit.
Disc menu is not supported on the Video CD being played.
Set the [PBC] option to [On] in the SETUP menu.
The files are not recorded in a format that the unit can play.
The unit does not support the codec of the DivX movie file.
The resolution is higher than the unit can support.
Check the remaining space on the disc.
Check that the source you are trying to record in not copy protected.
The power may have failed during recording.
Use a VR mode formatted disc for copy-once material.
Clock is not set to correct time.
The start time of the timer recording is past.
Two timer recordings may have overlapped, in which case only the earlier
one will record completely.
When setting the recording channel, make sure you set the unit's built-in
tuner, not the TV's built-in tuner.
TV is not Stereo-compatible.
Broadcast program is not in stereo format.
The A/V Output jacks on the unit are not connected to TV A/V In jacks.
29
Advertisement
Table of Contents
