Table of Contents
Advertisement
INSTALLATION
1
Place base
rear-facing
2
Thread vehicle lap belt through base belt Tabs
and buckle belt.
NOTE: Vehicle shoulder belt must NOT be
placed under belt Tabs.
3
Press down firmly on base to compress vehicle
seat cushion while tightening vehicle lap belt
(fig. a).
4
Pull front to back and left to right to check for
secure installation (fig. b).
If not secure, see "Vehicle Seat Belts" section.
5
Put car seat in base and pull up on car seat to
be sure it is locked in base.
6
Ball MUST be in green zone (fig. c). If
necessary adjust Foot (if available)
or place rolled towels under
base at vehicle seat crease.
NOTE: Vehicle must be on
level ground and child in
car seat when leveling.
7
Adjust handle to a position
behind car seat.
6
WITH
BASE
on vehicle seat.
(fig. a)
Tabs
Foot
(fig. b)
(fig. c)
Advertisement
Table of Contents
