LG ATNQ24GQSK1 Owner's Manual page 13

NOTE
!
• Depending on the product type, some
functions may not be available and dis-
played.
• Some products don't receive the wired
signals.
• When using the simultaneous operation
system, the system will operate approxi-
mately 1 - 2 minutes after pressing the re-
mote controller button.
• The displayed temperature can be differ-
ent from the actual room temperature if
the remote controller is installed some-
where exposed to direct sunlight or is
nearby a heat source.
• Depending on the product, wireless and
wired remote control are optional or
basic.
• Operation Modes : Cooling Mode → Auto
Operation → Dehumidification Mode →
Heating Mode → Fan Mode.
• Heating Mode is not available for Cooling
only Models.
CAUTION
!
Caution of handling the Remote Controller
• Aim at the signal receiver on the wired
remote controller so as to operate.
• The remote control signal can be re-
ceived at a distance of up to about 7m.
• Be sure that there are no obstructions be-
tween the remote controller and the sig-
nal receptor.
• Do not drop or throw the remote con-
troller.
• Do not place the remote controller in a lo-
cation exposed to direct sunlight, or near
the heating unit, or any other heat
source.
• Block a strong light over the signal recep-
tor with a curtain or etc. so as to prevent
the abnormal operation. (ex:electronic
quick start, ELBA, inverter type fluores-
cent lamp)
PRODUCT INTRODUCTION
NOTE
!
• The wireless remote controller do not
operate the swirl mode.(4Way Type)
• For more details refer to the Wireless
Remote Control Accessory manual.
• The actual product can be different
from above contents depending upon
model type.
13