Table of Contents
Advertisement
Timer function
Setting the Clock
1
Press CLOCK.
(If the clock requires setting, press and hold CLOCK
for more than 2 seconds.)
- The hours display begins to blink.
2
Select a 24 hour cycle or 12 hour cycle by
pressing .
. b b b b /B B B B >
> on the front panel.
3
Press SET/CD [[ to confirm the selected hour
cycle.
4
Use .
. b b b b /B B B B >
> on the front panel to set
the correct hours.
5
Press SET/CD [[ .
.
6
Use .
. b b b b /B B B B >
> on the front panel to set
the correct minutes.
7
Press SET/CD [[ and the correct time is shown in
the display window.
Timer Function
With the TIMER function you can have the radio recep-
tion, CD play, USB play and TAPE play turned on and off
at the desired time.
1
Press CLOCK to check the current time.
For your reference
If you don't set clock, timer function doesn't work.
2
Press TIMER to enter the timer setting mode.
"TUNERtDVD/CD tUSB tTAPE" flash in the
display window in turn.
For your reference
• If you want to correct the previous memorized TIMER
setting, press and hold the TIMER button more than 2
seconds.
• If you want to check the previous memorized TIMER
setting,press TIMER button briefly.
- The previous memorized timer setting for on Time and
" " indicator appears in the display window.
3
Press SET/CD [[ when the desired function
flashes.
4
a. 1) When you select TUNER function,
'PLAY' and 'REC' indicator flash in
the display window alternately for
about 3 seconds.
'PLAY' indicator : TUNER play only
'REC' indicator : TUNER play and recording
2) Press SET/CD [[ when the desired
function flashes.
16
3)
Select the previous memorized preset
number by pressing .
. b b b b /B B B B >
front panel and press SET/CD [[ .
'ON TIME' indicator appears for about 0.5
seconds in the display window and then
disappears.
b.
When you select DVD/ CD, USB or TAPE
function,
'ON TIME' indicator appears for about 0.5
seconds in the display window and then
disappears.
5
Set the hour to switch on by pressing
.
. b b b b /B B B B >
> on the front panel.
6
Press SET/CD [[ .
7
Set the minute to switch on by pressing
.
. b b b b /B B B B >
> on the front panel.
8
Press SET/CD [[ to confirm the turn on
minutes time.
'OFF TIME' indicator appears for about 0.5
seconds in the display window and then
disappears.
9
Set the hour to switch off by pressing
. b b b b /B B B B >
.
> on the front panel.
10
Press SET/CD [[ .
11
Set the minute to switch off by pressing
. b b b b /B B B B >
.
> on the front panel.
12
Press SET/CD [[ .
13
Adjust the volume level by pressing
. b b b b /B B B B >
.
> on the front panel.
14
Press SET/CD [[ .
" " appears in the display window and the timer
setting has been completed.
15
Turn the system off.
The selected timer functions are automatically
switched on and off at the preset times.
To cancel or check the timer
Each time the TIMER button is pressed you can select
the timer set or cancel. You can also check the timer
setting status.
To activate or check the timer, press the TIMER
button repeatedly so that " " appears in the display win-
dow.
To cancel the TIMER, press the TIMER button
repeatedly so that " " disappears from the display
window.
Note
Note
• If you insert the DVD or DivX except audio
CD/MP3/WMA on the unit, the timer function will be
operated to the TUNER.
• This is not supported in the multi card reader.
> on the
Advertisement
Table of Contents
