Table of Contents
Advertisement
ow to use washer
H
Child lock
If you choose to lock the buttons on the
control assembly to prevent tampering, this
function may be selected.
• Child lock can be set by pressing and
holding the Option and Rinse button
simultaneously. (About three seconds)
• When child lock is set, all buttons are
inoperable, except Power button.
• To deactivate Child lock system, press and
hold the Option and Rinse button
simultaneously again.
(About three seconds)
• To change to the desired program, whilst in
child lock mode.
1. Press and hold both Option and Rinse
button together once again.
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
• The child lock can be set at any time and it
is automatically canceled when operational
errors occur. Also Child lock works when
power is off.
Change
the desired
program
Rinse
• By pressing the Rinse
button, the Rinse type can
be selected.
1. Normal
• Cotton-Eco / Cotton / Synthetic performs 3
Rinses
• Wool/Silk / Hand Wash /Quick 30 / Delicate /
Duvet / performs 2 Rinses
2. Rinse + & Rinse ++
• Used to additional rinse, which may assist
in removing traces of detergent residue.
• By selecting Rinse + or Rinse ++ function,
the Rinse Time and the Rinse water are
increased.
3. Rinse Hold
• Is selected by pressing the Rinse button
repeatedly this function leaves clothes in the
washer; suspended in the water after a rinse
without entering into spin.
• To proceed through to a drain or spin, once
the rinse hold function is completed using to
program dial scroll to the required program.
The required lamp will light up for
identification.
19
Advertisement
Table of Contents
