Toshiba USB001Z Instruction Manual page 2

Introduction
Thank your for purchasing a "USB-to-serial conversion unit (USB001Z unit)," an optional device for the
TOSVERT series inverters.
The USB-to-serial conversion unit makes it possible to use a USB port on your computer as a COM port
for connecting it to an inverter for data communications.
This instruction manual explains how to connect the USB-to-serial conversion unit, and for correct use
of the USB-to-serial conversion unit. Please read this manual carefully along with the instruction
manual for your inverter and the communication function manual.
When using the USB-to-serial conversion unit, keep this manual handy for future maintenance and
inspections.
[Explanation about the type of the USB-to-serial conversion unit]
USB
[Accessories check]
The USB-to-serial conversion unit is composed of the items listed below.
Unpack the product and check for missing or damaged components.
(1) USB-to-serial conversion unit ................................................. 1
(2) USB-to-serial Conversion Unit Instruction Manual................... 1
(3) Floppy disk ................................................................................ 1
- Device driver
- Instruction Manual (Detailed version) ............This manual
[Note]
This unit does not include an inverter-unit connection cable or a personal computer-unit
connection cable. Purchase these cables separately. (Refer to page 4.)
001 Z − 1
(USB001Z)
(E6581282)
(E6581299)
Revision No.
Cable length (Z: No cable)
USB option No.
USB option
- 1 -
E6581299
RS485 (2-wire type)
LOGIC
USB
Option Unit
USB
Instruction
Manual