Advertisement
TOS-SN-1
Mounting
Mount the extended panel (TOS-SN-1) in front of the panel board as mentioned below. Make
an opening for mounting the extended panel in front of the panel board. Refer to "Figure 1.
Panel cut dimensions", for proper dimensions and then set the extended panel in the opening
with M3 screws, nuts and spacers supplied as accessories. Refer to "Figure2. Mounting of
extended panel" for dimensions of extended panel.
Figure1. Panel cut dimensions (Unit: mm)
Dimensions
Figure2. Dimensions of the extended panel (unit: mm)
Γ
For additional assistance, please contact Toshiba Adjustable Speed Drive Marketing Dept. at (800) 872-2192
Advertisement
