Table of Contents
Advertisement
Connections
Connecting to Optional Equipment
You can use an optical output of a Digital Device to the
OPTICAL IN connector.
This unit receives the optical digital signal from optional
equipment.
COMPONENT
VIDEO OUT
(PROGRESSIVE SCAN)
Pr
Pb
S-VIDEO
OPTICAL
OUT
IN
Y
WOOFER
1 1
Connect an optical output of DVD Player (or
Digital Device etc) to the OPTICAL IN connector.
2 2
Press the AUX button on the front panel or the
remote control until the "OPT IN" indicator is
displayed in the display window.
8
Connecting USB
USB Memory,
MP3 Player (or
Memory Card
OPTICAL
OUT
Reader, etc.)
DVD Player
(or Digital Device,
etc)
1 1
2 2
To Remove the USB from the unit
1. Choose a different function mode or press the STOP
(x) twice in a row.
2. Remove the USB from the unit.
otes
• Don't extract the USB device in operating.
• Music files (MP3/WMA), image files (JPEG) and DivX
files can be played.
• This unit can not use USB HUB.
• Recommended Memory Card
Compact Flash Card (CFC), Micro Drive (MD), Smart
Media Card (SMC), Memory Stick (MS), Secure Digital
Card (SD), Multi Media Card (MMC), Memory Stick Pro
(MS-Pro)
- Compatable with : FAT16,32
- Only use the memory cards recommended.
• Devices which require additional program installation
when you have connected the unit to a computer are
not supported.
• In case of a USB HDD, make sure to connect an auxil-
iary power cord to the USB HDD for porper operation.
A primary partition of drive is supported up to four. If
there is an extention partition it is not supported.
• If the drive of USB device is two or more, a drive
folder is displayed on the screen. If you want to
move to the previous menu after you select a folder,
press RETURN.
• Digital camera and mobile phone are not supported.
Connect the USB port of USB memory (or MP3
player, etc) to the USB connector on the front
panel.
Select USB function by pressing the USB
button on the front panel or the remote control.
The "USB" is displayed in the display window.
Advertisement
Table of Contents
