RADIUS Type
RADIUS Server
Authentication
Port
Shared Secret
Session Timeout
Accounting
62
Select "Internal" to use the access point's
built‐in RADIUS server or "external" to use an
external RADIUS server.
Enter the RADIUS server host IP address.
Set the UDP port used in the authentication
protocol of the RADIUS server. Value must be
between 1 – 65535.
Enter a shared secret/password between 1 –
99 characters in length. This should match the
"MAC‐RADIUS" password used in IV‐3‐1‐3‐6 or
IV‐3‐2‐3.
Set a duration of session timeout in seconds
between 0 – 86400.
Enable or disable RADIUS accounting.