Philips GC3592 Manual page 13

after the Calc-Clean process
1 Put the plug back into the wall socket and let the iron heat up to
let the soleplate dry.
 Unplug the iron when the temperature light goes out.
 Move the iron gently over a piece of used cloth to remove any
water stains that may have formed on the soleplate.
 Let the iron cool down before you store it.
storage
1 Set the steam control to position 0, remove the plug from the wall
socket and let the iron cool down.
 Wind the mains cord round the cord storage facility (Fig. 15).
 Store the iron on its heel in a safe and dry place.
environment
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an official collection point for
recycling. By doing this, you help to preserve the
environment (Fig. 16).
guarantee & service
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you find its phone number in the
worldwide guarantee leaflet). If there is no Consumer Care Centre in
your country, go to your local Philips dealer.
troubleshooting
This chapter summarises the most common problems you could
encounter with the appliance. If you are unable to solve the problem with
EnGlish
1