8BITDO SF30 Pro Manual

Basic operation
Press START to turn on the controller
Press and hold START for 3 seconds to turn off the controller
Press and hold START for 8 seconds to force turn off the controller

Bluetooth connection
Switch
1. Press START+Y to turn on the controller first, then press and hold PAIR for 3 seconds to enter
pairing mode. LED will，LEDs will start to rotate from left to right.
2. Go to your Switch Home Page to click on Controllers, then click on Change Grip/Order and
wait for controller to sync up. LED will become solid when connection is successful.
3. Controller will auto reconnect to your Switch with the press of START once it has been
paired.
STAR button = Switch screenshot button, Home button = Switch HOME button.

Android
1. Press START+B to turn on the controller, LED 1 will start to blink.
2. Press and hold PAIR for 3 seconds to enter pairing mode. LED will rotate from left to right.
3. Go to your Android device's Bluetooth setting, pair with [8Bitdo SF30 Pro] or [8Bitdo SN30
Pro]. LED will become solid when connection is successful.
4. Controller will auto reconnect to your Android device with the press of START once it has
been paired.
USB Connection: connect the controller to your Android device via USB Cable after step 1.

Windows
1. Press START+X to turn on the controller, LEDs 1, 2 will start to blink.
2. Press and hold PAIR for 3 seconds to enter pairing mode. LEDs will rotate from left to right.
SF30 Pro and SN30 Pro
80DB 80DA