Table of Contents
Advertisement
16
WATCHING TV
WATCHING TV
Connecting an antenna or
cable
Connect an antenna, cable, or cable box to watch
TV referring to the following. The illustrations may
differ from the actual accessories and an RF cable
is optional.
Connecting an antenna or basic
cable
Connect the TV to a wall antenna socket with an
RF cable (75 ohm).
(Not Provided)
NOTE
Use a signal splitter to use more than 2 TVs.
y
If the image quality is poor, install a signal
y
amplifier properly to improve the image
quality.
If the image quality is poor with an antenna
y
connected, aim the antenna to the proper
direction.
Visit http://AntennaWeb.org for more
y
information about the antenna and cable
connection.
Connecting with a cable box
Connect the TV to a cable box and the cable box
to a wall antenna socket with 2 RF cables (75
ohm).
(Not Provided)
CAUTION
Make sure not to bend the copper wire of
y
the RF cable.
Copper wire
Complete all connections instructions
y
between devices, and then connect the
power cord to the power outlet to prevent
damages to your TV.
Advertisement
Table of Contents
