5-3-3-1-1 DRAM Controller Configuration
Parameter
DRAM Controller Configuration
DRAM Power Options
Cmd2T
Gear Down Mode
BIOS Setup
Description
Press [Enter] to configure DRAM Power Options.
Power Down Enable
– Enable/Disable DDR power down mode.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
Selects the Cmd2T mode on ADDR/CMD.
Options available: Auto, 1T, 2T. Default setting is Auto.
Enable/Disable the Gear Down Mode function.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
- 90 -