ABB HT562595 User Manual page 26

Table of Contents

Advertisement

Operation Manual / 2 Safety / A130 - A155
1
Safety
Welding work in the vicinity of the turbocharger
When performing welding work in the vicinity of the turbocharger, always cover the filter
silencer to prevent the filter mat from being damaged.
Keep flammable objects and substances out of the vicinity of flying sparks.
Cover all connections on the turbocharger so that no foreign objects can enter the
turbocharger.
Safety during cleaning
If cleaning agents or solvents are used for cleaning, the corresponding material safety data
sheet and the safety instructions in section Hazards due to operating materials and supplies
must be observed.
Observe the material safety data sheet for the cleaning agent or solvent.
Wear protective clothing.
Inspect the electric cables for abrasion and damage before and after your cleaning work.
Safety during disassembly, assembly, maintenance and repair
Observe the procedures for set-up, service and inspection work and the inspection
intervals.
Inform the operating staff before starting any service or repair work. Make sure the engine
is not started while work is being conducted on the turbocharger.
Before taking off any cover or removing any guard from the turbocharger, switch off the
engine and wait until the turbocharger has come to a standstill.
Make sure that the oil supply is interrupted, especially with an external oil supply.
Only restart the engine after all parts have been properly fitted again and oil supply is
ensured.
Mechanical operations on the turbocharger
Components of the turbocharger can be damaged or destroyed as a result of
improper procedures.
CAUTION
Only perform operations that are described in this manual.
Only perform operations for which you have received instruction or
training.
Safety when taking out of operation at short notice or preparing for mothballing
Secure rotor against turning. The rotor can rotate due to the stack draught alone.
Wear appropriate protective clothing.
Observe the material safety data sheet for the cleaning and mothballing agents.
© Copyright 2015 ABB. All rights reserved.
HZTL4022_EN
Page 16 / 18
Revision B
April 2015

Advertisement

Table of Contents
loading

This manual is also suitable for:

A135-m65

Table of Contents