Dismantling And Fitting; Introduction - ABB HT562595 User Manual

Operation Manual / 4 Product description / A130-M.. - A145-M..
8

Dismantling and fitting

8 Dismantling and fitting
8.1

Introduction

The precondition for the work described in the following is a turbocharger removed from the
engine (see chapter Removal and installation).
Danger of burns
Touching hot surfaces or contact with hot operating fluids can cause burns.
Do not touch hot surfaces. Observe the warning plate on the

WARNING
turbocharger.
Wear heat-resistant safety gloves and protective clothing.

Wait for the turbocharger to cool down before carrying out any work.

Wear safety gloves against thermal risks.
Cutting injuries when working on the turbocharger
Some parts on the turbocharger may have sharp edges. There is a risk of a
cutting injury.
WARNING
Wear safety gloves against mechanical risks when conducting assembly

and disassembly work.
Wear safety gloves against mechanical risks.
Further operations
This Operation Manual may be used to carry out only those operations that
are described in it. If the cartridge group is disassembled or assembled
CAUTION
incorrectly, this can lead to serious engine damage.
ABB Turbo Systems recommends having further operations carried out

only by trained staff or an ABB Turbocharging Service Station.
Marking casing position for assembly
ABB Turbo Systems recommends marking the casing positions prior to
disassembly.
NOTICE
© Copyright 2015 ABB. All rights reserved. HZTL4031_EN
Page 73 / 115
Revision C February 2016