Advertisement
4. Troubleshooting
The dishwasher is able to indicate a series of malfunctions by
illuminating a number of lights simultaneously (see key below).
FAULT
E1
E2
E3
E4
E5
E6
30
User instructions
Acquastop failure
The anti-flooding system has been activated (for
the relevant models only). The system is tripped
in case of water leaks. Contact the after-sales
service.
Safety level
The system which limits the water level inside
the dishwasher has been tripped. Interrupt the
program and switch off the dishwasher. Switch
the dishwasher back on, program it again and
start the washing cycle. If the problem persists,
contact the after-sales service.
Water heating malfunction
The water is not heated or the heating
parameters are not correct. Repeat the washing
program; if the problem persists, contact the
after-sales service.
Water temperature monitoring malfunction
Interrupt the program and switch off the
dishwasher. Switch the dishwasher back on,
program it again and start the washing cycle. If
the problem persists, contact the after-sales
service.
Water intake malfunction
The appliance does not take in water or does not
do
so
connections are correct, the water intake tap is
turned on and the filter is not fouled. If the
problem persists, contact the after-sales service.
Water pump-out malfunction
The appliance does not pump out the water or
does not do so correctly. Check that the drain
hose is not kinked or crushed and that the
siphon and filter are not fouled. If the problem
persists, contact the after-sales service.
DESCRIPTION
correctly.
Check
that
the
water
Advertisement
