Yamaha CRW4216E Series User Manual page 17

Chapter 2 - Installing the Yamaha CRW4216E Drive
9. Tighten the four fastening screws securely.
10. Attach the cover of your computer.
11. Connect the power cable to an AC outlet, and switch on
your computer.
Make sure that the LED located on the panel of the CRW4216E drive is lit.
12. Start up your operating system.
For the procedure, refer to the manual for your operation system.
13. Install the writing software.
For the installation procedure, refer to the manual for your writing soft-
ware.
V O L
O N /
D IS C
R E A
D /
W R IT
E
11