Hitachi CP-DX351 User Manual page 40

Function
Standby Mode
Lamp Settings
Security
Settings
Closed
Caption
Reset All
Settings
Use / to select a standby mode.
Normal
The projector is able to provide the following functions when it is in
standby mode.
• The projector can output a VGA signal when it is in standby
mode and the COMPUTER IN 1 port is correctly connected to
devices.
• The projector can output audio signals when it is in standby mode
and the corresponding ports are correctly connected to devices.
Speaker is disabled in standby mode.
See "Connection" on page 12
Saving
The projector consumes less than 0.5W power during standby when
this mode is selected. The Monitor out and Audio out functions are
disabled.
Lamp Mode
See "Setting Lamp Mode as Economic or Intelligent Eco" on page 42
for details.
Reset Lamp Timer
See "Resetting the lamp timer" on page 45
Equivalent Lamp Hour
See "Getting to know the lamp hour" on page 42
the total lamp hour is calculated.
See "Utilizing the password function" on page 19
Closed Caption Enable
Activates the function by selecting On when the selected input signal
carries closed captions.
• Captions: An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed
captioned (usually marked as "CC" in TV listings).
This function is only available when a Composite video or S-
Video input signal is selected and its system format is NTSC.
Caption Version
Selects a preferred closed captioning mode. To view captions, select
CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary
language in your area).
Returns all settings to the factory preset values.
The following settings will still remain: Language, Mirror, High
Altitude Mode, Security Settings.
39
Description
for how to make the connections.
for details.
for details on how
for details.