Table of Contents
Advertisement
Description of each menu
Function
Wall Color
Aspect Ratio
Keystone
Position
Phase
H. Size
Magnify
In the situation where you are projecting onto a colored surface such as
a painted wall which may not be white, the Wall Color feature can
help correct the projected picture' colors to prevent possible color
difference between the source and projected pictures.
Use the
/
buttons to select a color which is closest to the color of
the projection surface.
This function is only available when a computer signal (analog
RGB) is selected.
There are three options to set the image's aspect ratio depending on
your input signal source. See
details.
Corrects any keystoning of the image. See
page 23
for details.
Displays the position adjustment page. To move the projected image,
use the directional arrow keys. The values shown on the lower position
of the page change with every key press you made until they reach their
maximum or minimum.
This function is only available when a computer signal (analog
RGB) is selected.
Adjusts the clock phase to reduce image
distortion.
This function is only available
when a computer signal (analog RGB) is selected.
Adjusts the horizontal width of the image.
This function is only available when a computer signal (analog
RGB) is selected.
Magnifies or reduces the projected image. See
searching for details" on page 23
35
Description
"Selecting the aspect ratio" on page 24
"Correcting keystone" on
"Magnifying and
for details.
for
Advertisement
Table of Contents
