Maintaining Your System - RocketFish Rocketboost RBWHP01RX User Manual

RF-RBWHP01_10-0652_MAN_V1.fm Page 22 Thursday, July 29, 2010 8:26 AM
Listening to the digital wireless stereo headphones
To listen through the headphones:
Set the headphone volume level to the minimum.
1
Turn on the headphones and docking station. Make sure that your
2
docking station and headphones are wirelessly "joined. "
The power indicators light steadily if the docking station and
headphones are joined and blink slowly if they are not. If they are not
joined, see "Establishing communication" on page 18.
Put your headphones on your head. Adjust the angles of the left and
3
right ear pieces until you feel comfortable.
Turn on your audio source and begin playback.
4
If there are multiple sources in the Rocketboost network, press the
SOURCE button on the headphones to find the source you want to listen
to. The TX indicator on the docking station (if it is a hub) blinks several
times, indicating that the current audio source is changing.
Adjust the headphone volume to your normal listening level.
5
Caution: Continuous use at high volume may permanently damage your hearing.
Note: If the system is connected to an A/V receiver with an external amplifier, turn off
the amplifier to prevent hearing sound from the amplifier speakers.
Turning off the system
To turn off the system:
Set the POWER ON/OFF switch located on the headphones' left earpiece to
1
OFF.
Press the POWER button on the docking station. The power indicator on
2
the docking station goes off.

Maintaining your system

Use a soft cloth dampened with a weak solution of mild detergent
and water. Dry the device immediately afterwards with a clean cloth.
Do not use abrasive cloth, thinners, alcohol, or other chemical
solvents, because they may damage the finish or remove the panel
lettering.
Cautions:
• Do not block the ventilation openings.
22