Yamaha YGRD-2500 Owner's Manual page 9

Assembly
2
Attach the main unit of the glockenspiel to the legs.
CAUTION
2-1
Lock the caster stoppers on either side so that the legs do not move about during the assembly.
2-2
Align the holes (two holes on each side) located on the underside of the side frames with the
guide pins on the top of the legs and then place the glockenspiel main unit onto the legs.
* If the guide pins can not be aligned with the holes on the underside of the side frames, temporarily dis-
connect the leg stay and try again.
Side frame
Guide pin
Stopper
2-3
Use the fixing knobs (supplied) to secure the legs to the right and left side frames (two loca-
tions on the low register side and one location on the high register side).
Low register
side
20
The glockenspiel is heavy so make sure that two persons carry out the op-
eration.
Also, take care not to pinch your fingers between the glockenspiel and the legs.
Leg stay
Fixing knobs
Glockenspiel
Guide pin
Stopper
High register
side
Fixing knob
Side frame