Table of Contents
Advertisement
en Installation instructions
19 mm wall thickness: Open up the spacers on
8.
both of the mounting parts.
Screw the mounting parts to the body on the left
9.
and right.
Remove the limit stops from the bottom of the
10.
mounting parts.
Preparing the appliance
Insert the holders for the wall edging strip on the
1.
outside rear of the appliance into the cut-outs and
fold them in to the centre of the unit.
Use the screws provided to secure the handle strip
2.
to the filter pull-out.
14
Connect the enclosed power cord to the appliance
3.
and secure the stain relief.
Installing the appliance
Fit the appliance in the cabinet
1.
bolts
and attach the protective caps
Appliance width 90 cm: Pull the filter pull-out out
2.
completely towards the front. Also use two screws
each on the left and right to screw the appliance to
the side upper cabinets from below.
Adjust the wall closing strip to the clearance
3.
between the appliance and the wall.
, lock the fastening
.
Advertisement
Table of Contents
