Table of Contents
Advertisement
10.7 Cleaning the ceiling spray
arm
We recommend to clean the ceiling spray
arm regularly to prevent soil from
clogging the holes. Clogged holes can
cause unsatisfactory washing results.
The ceiling spray arm is placed on the
ceiling of the appliance. The spray arm
(C) is installed in the delivery tube (A)
with the mounting element (B).
1. Remove the stoppers from the sliding
rails of the cutlery drawer and pull the
drawer out.
1
2
2. Move the upper basket to the lowest
level to reach the spray arm more
easily.
3. To detach the spray arm (C) from the
delivery tube (A), turn the mounting
element (B) counterclockwise and
pull the spray arm downwards.
4. Wash the spray arm under running
water. Use a thin pointed tool, e.g. a
toothpick, to remove particles of soil
from the holes. Run the water
through the holes to wash soil
particles away from the inside.
5. To install the spray arm (C) back,
C
insert the mounting element (B) in
the spray arm and fix it in the delivery
B
tube (A) by turning it clockwise. Make
sure that the mounting element locks
into place.
A
6. Install the cutlery drawer on the
sliding rails and insert the stoppers.
ENGLISH
21
Advertisement
Table of Contents
