Troubleshooting - Zte WP651 User Manual

FCC that it does not exceed the limits established by each government for safe
exposure. The tests are performed in positions and locations (e.g., at the ear and
worn on the body) that conform to a uniform testing methodology determined by an
expert standards body and then reported to the FCC.
While there may be differences between the SAR levels of various phones and at
various positions, they all met the governmental requirements for safe exposure.
Please note that improvements to this product model could generate differences in the
SAR value for later products; in all cases, products are designed to be within the
guidelines.
The highest SAR value for this ZTE WP651 model phone when tested for use on the
right cheek was 1.53 mW/g.

Troubleshooting

If your phone appears following phenomenon in the process of application, read
following relative information at first. If the problems still can not be solved, please
contact with the distributor or service provider.
Problem
When switching on the phone, it
prompts "Enter PIN1".
When switching on the phone, it
prompts "Emergency only".
When switching on the phone, it
prompts "Enter phone code".
No ring tone prompt for a
incoming call.
No display on screen when
disconnect external power
supply.
Press Call key, but no number is
Check Point
Input your PIN1 Code which offered
with SIM card together. If you have
changed PIN1 code, input the new
PIN1 Code.
Check whether valid SIM card is
inserted or not.
Enter phone lock code you set
already to unlock the phone.
Check volume setting of ring tone.
Check whether the battery has
electricity, or it is damaged; or power
on the phone again.
Check whether you have set
18